Effect of blast-induced ground vibration on factor of safety of pit wall stability

Abstract

The regulated maximum peak particle velocity (PPV) from blasting operations of an open-pit coal mine is less than 2 mm/s to prevent mainly any public disturbance such as ground vibration and air blast. However, the blast-induce ground vibration can also decrease the stability of pit slope, which has not been intensively studied. A claystone pit wall, which is geotechnically investigated as having a plane failure type and the natural condition factor of safety (FS), has been selected for this study. The FS is selected to measure the effect of blast-induced ground vibration on the slope stability. The limit equilibrium, pseudo-static 1 (), and pseudo-static 2 () methods are used to determine the FS. The vibration results of blasting monitored at three slope positions: Crest, middle, and toe, from two areas at the same pit wall, are recorded by blasting seismographs. Maximum charge weight per delay and the distance from blast areas to seismographs are collected to construct the scaled distance. The percentage change of FS of three methods from both areas compared to natural condition FS are all less than 4 percent considered that the slope stability is safe from blasting vibration (less than 15 percent). The relationship between the FS and maximum PPV from the limit equilibrium, pseudo-static 1 (), and pseudo-static 2 () methods indicate that the adverse maximum PPVs given the unity FS are 16.60 and 4.58, and 4.74 mm/s, respectively. The regulated PPV less than 2 mm/s at the mine is reasonable to prevent any possible plane failure. However, many impact parameters have not been included in this study, and their effects may disturb the pit wall stability.