Please use this identifier to cite or link to this item:
Title: Hardgrove grindability index and approximate work index of sodium feldspar
Authors: Chairoj Rattanakawin
Aung Lay Tin
Authors: Chairoj Rattanakawin
Aung Lay Tin
Keywords: Multidisciplinary
Issue Date: 1-May-2019
Abstract: © 2019, Prince of Songkla University. All rights reserved. The purpose of this research was to study the feldspar of Nopphitam District, Nakhon Si Thammarat Province, Thailand with emphasis on Hardgrove grindability and determination of the approximate work index. Feldspar samples were collected, prepared, and analyzed for their chemical composition. From the analysis of the alkaline metal oxides, all samples were characterized as sodium feldspar. The Hardgrove grindability test used a ball-race test mill. The Hardgrove grindability indices of these feldspar samples had an average of 46.25. Knowing the average Hardgrove index, a calculated work index of 12.88 kW/STPH was estimated using Aplan’s empirical formula. This average work index was less comparable to those of feldspar ores given in the literature. Therefore, the method of Berry and Bruce was used to determine the specific energy and approximate work index. By running a batch dry-grinding test in a rod mill, an average specific energy of 7.34 kW/STPH was determined using Bond’s formula with the reference work index of 11.25 kW/STPH. This specific value is limited to these test conditions: (1) 18x36 cm mill with material hold-up of about 0.08, media loading of about 0.4, and half interstitial filling and (2) each sample must be ground by 8 steel rods with dimensions of 3.5x35 cm each for 15 min. Under these conditions, the approximate work indices of various minerals can be rapidly estimated knowing the 80% passing size (µm) of both feed and product from rod-milling that conforms to the indicated conditions. For example, the approximate work index of Sam Ngao sodium feldspar was 11.03 kW/STPH. This work index was quite comparable to those acquired from various mill manufactures. To obtain more accurate values of sodium feldspar’s work indices, the time-consuming Bond procedure should be performed with a number of corrections for different milling conditions.
ISSN: 01253395
Appears in Collections:CMUL: Journal Articles

Files in This Item:
There are no files associated with this item.

Items in CMUIR are protected by copyright, with all rights reserved, unless otherwise indicated.