Please use this identifier to cite or link to this item: http://cmuir.cmu.ac.th/jspui/handle/6653943832/55819
Title: The fabrication and dielectric constant of (1-3) piezoceramic polymer composites
Authors: Jerapong Tontrakoon
Gobwute Rujijanagul
Kamonpan Pengpat
Sukum Eitssayeam
Uraiwan Intatha
Ratabongkot Sanjoom
Tawee Tunkasiri
Keywords: Engineering
Materials Science
Issue Date: 1-Jan-2016
Abstract: © 2016 Trans Tech Publications, Switzerland. Piezoceramic-polymer composites having (1-3) type connectivity and of a scale size suitable for high frequency >1 MHz transducers was carried out in this study. The piezoceramics (PbZr0.52Ti0.48O3, PZT) were prepared by the conventional mixed oxide route. The starting powders of PbO, ZrO2 and TiO2 were mixed and calcined at 800oC. The calcined powder was mixed with excess PbO and a lithium/bismuth-based glass forming in order to lower the sintering temperature to approximately 1000oC. A method for extruding rods of approximately 400 μm diameter was developed. The fast firing process was carried out to sinter the PZT rods. Then the rods were assembled and impregnated with epoxy resin to form 1-3 composites containing approximately 20 and 50 vol% piezoceramics. Both PZT rods and the composites were studied by a scanning electron microscope (SEM). The dielectric properties of the composites were measured. The equivalent capacitance model was employed to determine the dielectric for comparison.
URI: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84970024115&origin=inward
http://cmuir.cmu.ac.th/jspui/handle/6653943832/55819
ISSN: 10139826
Appears in Collections:CMUL: Journal Articles

Files in This Item:
There are no files associated with this item.


Items in CMUIR are protected by copyright, with all rights reserved, unless otherwise indicated.