Please use this identifier to cite or link to this item:
|Title:||Influence of composition and isothermal sintering on the properties of hydroxyapatite bioceramic bodies|
|Abstract:||This work reports the influence of chemical composition and sintering schedule on the properties of sintered bodies of hydroxyapatite (HA) bioceramic. The method of preparing sintered bodies by solid state reaction and uniaxial pressing. The raw material used calcium carbonate (CaCO3) and ammonium dihydrogen phosphate (NH4H2PO4) powder as precursors. These powders were mixed at CaCO3: NH4H2PO4 mass ratio of 1:0. 697, 1:0. 692, 1:0. 689, 1:0. 685 and 1:0. 68, respectively. The compositions in the temperatures range of 800-1300 °C for 3 hour. The sintered bodies were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR). Properties including phase, microstructures, porosity and bending strength of the samples. The results show that green bodies can be sintered at 1150 °C for 3 hours. This temperature found that crystals growth, highest of HA phase content in sintered bodies, good density and high efficiency strength properties. © (2014) Trans Tech Publications, Switzerland.|
|Appears in Collections:||CMUL: Journal Articles|
Files in This Item:
There are no files associated with this item.
Items in CMUIR are protected by copyright, with all rights reserved, unless otherwise indicated.