Please use this identifier to cite or link to this item: http://cmuir.cmu.ac.th/jspui/handle/6653943832/51628
Title: Study of mechanical properties of magnesium oxide doped alumina (Al 2O 3) and yttria stabilized zirconia (YSZ) composite for medical applications
Authors: A. Phothawan
K. Nganvongpanit
T. Tunkasiri
S. Eitssayeam
Keywords: Engineering
Issue Date: 15-May-2012
Abstract: The aim of this research is to study the mechanical properties such as hardness, wear resistance etc, of the magnesium oxide (MgO) doped alumina (Al 2O 3) and yttria stabilized zirconia (YSZ) composite, We first prepared MgO-doped Al 2O 3 (denoted as Al 4) by mixing Al 2O 3 powder and 0.4 wt% of MgO powder. After that Al 4 powder was mixed YSZ powder, with the formula [(x)Al 4 - (100-x)YSZ] when x was varied from 0 - 100 by wt%. The samples were sintered at 1450, 1500, 1550, 1600 and 1650 °C. In addition, microstructure of the surface was studied employing both optical and scanning electron microscopes. The hardness of the surface was investigated by Vickers indentation technique and pin on disk apparatus was employed for wear rate measurement. The results showed that the density and volume shrinkage decreased with the increase of Al 4 content. The grain size and porosity of the specimens tend to decrease when the sintering temperature increases. The hardness and wear resistance of the samples increased with the increase of Al 4 up to 90 %. It was also found that the material is not toxic to the body. © (2012) Trans Tech Publications.
URI: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84860808477&origin=inward
http://cmuir.cmu.ac.th/jspui/handle/6653943832/51628
ISSN: 10226680
Appears in Collections:CMUL: Journal Articles

Files in This Item:
There are no files associated with this item.


Items in CMUIR are protected by copyright, with all rights reserved, unless otherwise indicated.