Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNarumon Lertcumfuen_US
dc.contributor.authorKachaporn Sanjoomen_US
dc.contributor.authorPongthep Arkornsakulen_US
dc.contributor.authorDenis Russell Sweatmanen_US
dc.contributor.authorTanathep Phatungthaneen_US
dc.contributor.authorKomsanti Chokethawaien_US
dc.contributor.authorGobwute Rujijanagulen_US
dc.description.abstract© 2016 Trans Tech Publications, Switzerland. Composites between mullite and modified BT were prepared by a conventional technique. The samples were calcined at 1300 °C for 2 h. The composites were sintered at 1250 °C for 2 h. The dielectric and mechanical properties samples were investigated. The mechanical properties were found to improve after sintering at a suitable temperature. Addition of the BT produced an improvement in dielectric constant due to the BT has high piezoelectric properties. A higher dielectric constant for a sample contained higher amount of the BT was related with a higher polarization in the samples.en_US
dc.subjectMaterials Scienceen_US
dc.titleDielectric and mechanical properties of mullite/modified batio<inf>3</inf>compositesen_US
dc.typeBook Seriesen_US
article.title.sourcetitleKey Engineering Materialsen_US
article.volume675-676en_US Mai Universityen_US
Appears in Collections:CMUL: Journal Articles

Files in This Item:
There are no files associated with this item.

Items in CMUIR are protected by copyright, with all rights reserved, unless otherwise indicated.