Please use this identifier to cite or link to this item:
Title: การวิเคราะห์ความเสียหายของก้านเจาะหินปูน ด้วยการตรวจสอบพื้นผิวการแตกหัก
Other Titles: Failure Analysis of the Limestone Drilling Rod by Surface Fractography Investigation
Authors: อาจารย์ ดร. อนิรุท ไชยจารุวณิช
ฉัตรชนก ทองทิพย์
Issue Date: Apr-2015
Publisher: เชียงใหม่ : บัณฑิตวิทยาลัย มหาวิทยาลัยเชียงใหม่
Abstract: This research studied on a failure cause determination of limestone drill rod using fractography investigation with failure analysis method. Five samples of drill rods, damaged during December 2014 – November 2015, were used in this study. Drilling Rods were tool steels with low alloys, DIN 1.6659 Standard, grade 31NiCrMo13-4 and carburized surface hardening. From hardness testing Results, it was found that outside surface hardness was similar and chemical composition was normal. From data of the 5 drill rods uses, the average of use duration was 36 days per rod and the average drilling depth per rod was 3671 meters, maximum drilling depth was 4,629 meters and minimum drilling depth was 2,505 meters because drill head fracture. The surface fractography analysis revealed that the fractures initiation of the drill rods started at the outer surface, especially at joint between drill rod and drill head. The mode of failure was found to be fatigue. Propagation of fracture was beach mark over the surface fracture appears, resulting from continuous low nominal stress. This was mainly origin fracture caused by a stress concentration, the joint or groove of screw, and impact force. Finally, a failure prevention guideline was proposed.
Appears in Collections:ENG: Independent Study (IS)

Files in This Item:
File Description SizeFormat 
ABSTRACT.docxAbstract (words)175.69 kBMicrosoft Word XMLView/Open    Request a copy
ABSTRACT.pdfAbstract173.62 kBAdobe PDFView/Open
FULL.pdfFull IS6.04 MBAdobe PDFView/Open    Request a copy

Items in CMUIR are protected by copyright, with all rights reserved, unless otherwise indicated.