Conversion of tobacco processing waste to biocrude oil via hydrothermal liquefaction in a multiple batch reactor

Abstract

Fossil fuels are the primary energy source of almost all societies and economies, but it is finite and scarce. The use of non-renewable fossil fuels threatens earth’s environment. At the same time, waste from agricultural and industrial activities is increasing. Most of this waste is discarded or poorly managed, causing many other environmental issues. Converting waste to energy is a promising route to address these challenges. We investigated the hydrothermal liquefaction (HTL) of high moisture content, tobacco-processing waste in a multiple batch thermal reactor to produce biocrude oil. The effects of operating conditions were studied and optimized for maximum liquid biocrude oil yield. HTL operating conditions considered were temperatures from 280 to 340 °C and residence times from 15 to 45 min for a fixed ratio of biomass to deionized water of 1:3. The reaction temperature was found to affect the yields and distribution of products significantly. The maximum yield of the liquid biocrude oil obtained was more than 52% w/w at 310 °C and 15 min. Under these conditions, almost 90% of the energy was recovered in biocrude oil and solid products. The liquid fraction was mainly composed of phenols, ketones, and nitrogenous compounds. This study provides a potential framework for eco-technologies for biomass waste-to-energy conversion with respect to converting tobacco processing residues to liquid biofuels and biochemicals. Graphic abstract: [Figure not available: see fulltext.]